PRODUCTS
All categories

Instruction

1. Graphite electrode transportation
1.Graphite electrodes are covered with rainproof tarpaulin during long-distance transportation.
2.When unloading the electrodes packed with wooden cases by hoisting machine, the steel wire rope must be used. The steel packing belt of the electrode shall not be directly hoisted and unloaded.
MORE
2. Graphite electrode storage
The electrodes should be stored in a clean and dry place; Temporarily unused electrodes and nipples do not remove the packaging, to prevent Dust and sundries fall on the thread or inside the electrode hole, which affects the accuracy of the product docking.
MORE
3. Operation of graphite electrode connection
1.The wet electrode should be dried before use.
2.Remove the foam protective cap on the alternate electrode holes and check if the inner thread of the electrode holes is intact.
MORE
4. Matters needing attention when using graphite electrode
The electrode holder shall be clamped outside the warning line of the top electrode,Otherwise, the electrode may be broken easily.The interface between gripper and electrode should be cleaned frequently,To maintain good contact with the electrode ,The clamping device cooling water jacket should avoid leakage.
MORE
上一页
1
  • Whatsapp +8615128062097
  • Email huaruicarbon@hrcarbon.cn
  • TEL 18837266930
  • TO TOP
Username used for comment:
index_messages
Description:
验证码